Bytes and Bites of Internet
Tips
Headless installation of Raspbian
Feb 17th
Do you happen to have a situation where you have spare Raspberry Pi laying around and get some project in mind… but don’t have spare monitor/keyboard/mouse? Or you are simply lazy like me to get off desk to put things together 
? I found out that it is really simple to actually do headless installation of Raspbian. And this is how you do that…
First you need to get current image of Raspbian. It can (and should) be downloaded from official site here. Next you need is a tool to flash that image into flash memory. My current favorite is Etcher. I find it’s interface very minimalistic and clean… And really easy to use. As far as storage medium, it is recommended to use good class 10 micro sd card. I usually use one from Sandisk or Samsung. It is advisable to use card that can withstand good amount of read and write cycle. This unfortunately is very important because Pi itself doesn’t have on board storage, meaning everything is stored on micro sd card. If it gets damaged or corrupted, you will lose your data. So quality of micro SD card is very important.
Creating LIVE CD out of existing Linux installation
Jun 1st
If you have been working with Linux for long enough time, you must have came across this question… “I have setup my Linux exactly the way I need it, now how do I replicate same setup in someone else’s computer?” or even better, “It would be great if somehow I can make LIVE CD out of my current setup”. This is more or less like what you would do using Sysprep but on steroids 
for Linux. I ran into this situation recently at work where I have to make bootable ISO (read live CD) out of existing Linux machine.
After initial struggling with my web searching skills (or may be it was my refusal to use Google for search… I am using DuckDuckGo), I found that there are in fact more than few tools available that do just that! I decided to give try a tool that made sense to me (which can be totally different for anyone else) is called Pinguy Builder. This tool is only for *buntu family. It is simple to use tool with decent GUI and ability to use shell interface…. win win for me. Following is what I did to create copy of my Linux installation in Live CD form so I can distribute it for my purpose. Depending on your *buntu version you need to download required version. Download page has more details about what version is needed for what version of OS, so I am not repeating that here.
Install DEB package as you would normally install any DEB package. Once it is installed you can start program by looking up for “Pinguy Builder” shortcut (or via shell). For first run you should see screen like this…
TNS Protocol Adapter Error in Oracle
Mar 21st
I like to spend time with Oracle DB just as much time I spend with SQL Server, but we exclusively use SQL Server at our work so I am not getting enough time with Oracle anymore. And another reason is it with Oracle there are way too many variable to consider when you are troubleshooting something. So when couple of days back when I boot up my VM of Oracle, I ran into this strange error and I was genuinely surprised to find how minute the cause could be.
So, this how the story goes …. after booting my VM, I started SQL PLUS utility (it is kind of SQLCMD equivalent of SQL Server, it is CLI to access Oracle DB to be exact). When I was asked to provide login credentials, when I provided ‘em I was greeted with following error message,
ERROR:
ORA-12560: TNS: protocol adapter error
Weird Snipping tool error
Sep 28th
I rely on great windows utility called Snipping tool both at work and at home to take screenshots of different things to write and keep things in records. And in past I have tried other screenshot replacement tools like Green Shot and Snag It but they are too much for my simple needs to take screenshot. So today when this tool stopped working in my home system, it was my top priority to fix it 
…
There were bunch of solutions explained over different forums including repairing office, killing another running snipping exe, reinstalling tablet pc component etc but none of them worked. One of the suggestion was to do system restore but that will not work for me either (because I have always felt lazy to keep by system backedup to the date 
).
Moving Outlook .PST file
Sep 16th
With SSDs getting cheaper everyday, I finally decided to upgrade myself to newer SSD few months back. SSD gives really nice IOPS pertaining to reads and writes of data but one very major flaw of this technology is it has limited number of read / write life span and you still need tweak your system in certain ways to make sure that your SSD performs well and have big enough lifespan. For example, you disable file Indexing in windows (which never helps anyways)… to avoid constant reads and writes to SSD. One more limitation of SSDs is smaller size (atleast in my case), I got 240 Gb SSD (‘coz don’t want to bet too much on new untested technology 
) … so I have kept all non-essential application installed on my good ol HDD to save space.
Since I have used Outlook for ever, my outlook files are pretty big (>5 Gb X 3 accounts) so they were taking significant space on my SSD plus there was also constant indexing and writing done by process. So I decided to move them to my HDD today.
According to MSDN all I had to do was to move PST file and start Outlook … at which point it will prompt me for location of PST file but after trying number different approaches, Outlook was simply recreating those PST files again and again at same location. So that approach was dud for me. After Ducking (yes, I have officially switched my search engine to DuckDuckGo … but my experience about it in some other posts 
) …
My own RSS synching Server using Tiny Tiny RSS
Mar 22nd
After demise of my favorite RSS Synching Service … Google Reader back in July 2013, I was little lost in quest for ultimate alternative 
since like many IT guys, I don’t stick to just one device and read my feed always from there. Plus me “experimenting” on different things on same system means loosing all of my unbackedup feeds at some unfortunate event of catastrophic system failure … which is just not acceptable for me.
So after little Googling I found out that it’s not just me there are many many people who were upset with Google for discontinuing this great service in the name of “cleaning”. And unlike many upset users who switched to just other local readers… some went a step further and decided to not to be dependent of any other service but to rollout their own solution !! I was able to find two services particularly interesting, one is CommaFeed and another one is Tiny Tiny RSS (aka tt-rss). But former can be pain in back to setup since it requires to checkout project from github and then deploy it on your sever and do whole lot of juggling. But Tiny Tiny RSS (aka tt-rss) is way more simpler solution than that. So I decided to use it to take my revenge to Google Reader . This post is about how did I setup tt-rss on my own server and use it to synch my feeds automatically.
First thing first, you need to find a hosting provider who provides hosting with PHP v. 5.3 or up. There are many providers that do free hosting with required PHP version. I decided to try http://www.freehostingeu.com/ for this demo (no strings attached with this provider 
).
Next is to get latest version of tt-rss from project site. And either extract whole project in your computer and upload everything from your computer OR just upload one TAR file and extract it on site.
Remotely execute file on another machine
Mar 15th
As usual, I was searching something over internet and going through random crap to look for something (I don’t remember now what was that) and I somehow found that there is really great utility available in good ol’ Sysinternals Suite which literally allows user to remotely execute any application on another machine !! That utility is called PsExec.
Honestly in past sometimes I really had wished that if there is some kind of tool available which can run some program on remote machine so that I don’t have to do something crazy. But I always assumed that it simply is not possible for whatever reasons and so it crossed my mind to even search for something.
Use of this tool is actually pretty simple. And like may other tools of Sysinternals suite this one too doesn’t have any GUI to interact with. Users are required to feed bunch of parameters in order to make it work. And it is very possible that it will not work in first try because of missing parameter. To get list of all parameters you can simply run exe on command prompt and you will see something like this …
